Bekatherm

Indoor/Outdoor use
Reduces absorbency surface strengthening
Improves adhesion

BK-Grund Silicat

Structural primer for silicate renders and paints

PRIMENA
KARAKTERISTIKE
PAKOVANJE
TON KARTA

Structural silicate primer for coating the lime, lime-cement and cement surfaces in order to provide uniformity, neutralization and hardening of the substrate before applying silicate paints and silicate decorative renders. It is advisable to tint the BK-Grund Silicat primer in the same shade as the finish. Can be used both in exteriors and interiors.

Preparation and application :
The substrate to which BK-Grund Silicat is applied must be solid, clean, dry and free of oil. BK-Grund Silicat primer should be mixed and diluted with approximately 15% of water (1.2 l of water for 8 kg of water; 3.75 l of water for 25 kg of water) before use. It is applied with a long-hair roller or brush in one coat. The time required for drying until applying the finishing coat is at least 12 hours. During installation, the temperature should be from +15°C to +30°C, relative humidity not exceeding 70%. See product datasheet for more detailed instructions.
Consumption :
Approximately 0.2-0.25 kg/m² depending on absorbency and roughness of the wall surface.
Shelf life and storage :
12 months in original sealed packing. Store at temperatures from +5°C to 25°C, protected from direct sunlight and frost.
8; 25kg 

Kalkulator potrošnje


Dokumentacija

Slični proizvodi

BUILDING. COLORING. INSPIRING.

© 2024 Banja Komerc Bekament d.o.o. — All Rights Reserved.
crossmenu