BK-StirolFix White

White fl exible adhesive for embedding reinforcement mesh.

USE

CHARACTERISTICS

PACKAGE

White cement-based mineral adhesive designed for embedding the reinforcement mesh and leveling the entire facade surface. BK-StirolFix White is used as a base coat, i.e. adhesive for reinforcement within the Bekatherm Standard thermal insulation system. BK-StirolFix White can also be used for bonding EPS and MW thermal insulation boards.

Preparation and application :

The preparation is performed by adding the powder to about 26-28% of water (6.5-7 l of water for 25 kg of product) until complete homogenization. Leave the mass to rest for about 10 minutes and then stir again to obtain an adhesive of appropriate density. The prepared adhesive is applied to thermal insulation boards (dotted in the middle and in the form of strips along the edges), and then the boards are bonded to the substrate by lightly pressing. When embedding reinforcement mesh, the adhesive is applied with a serrated steel trowel (tooth size 8-10 mm) on the dedusted styrofoam surface. The reinforcement mesh (with a minimum 10 cm overlap between strips) is pressed into the freshly applied adhesive from downwards upwards. After drying, the entire surface is leveled with a new layer of adhesive, so that the total thickness of the final layer of adhesive is 4-5 mm. The adhesive should be protected from premature drying and freezing. See the product datasheet for more detailed instructions.

Technical data :

Application temperature: Substrate and air temperatures from +5°C to +30°C. Possible to embed reinforcement mesh: after a minimum of 48 hours. Possible to apply finishing coats: after a minimum of 7 days.

Consumption :

About 5-6.5 kg/m² for bonding and about 5-7 kg/m² for leveling, depending on the quality of the substrate, the type of thermal insulation material used, etc.

Expiration date and storage :

12 months in original packaging in dry room on pallets.

25kg