BK-S Plast

Silicate-based facade render

USE

CHARACTERISTICS

PACKAGE

TONE CARD

Thin-layer silicate decorative render in the form of paste intended for protection of facade wall surfaces. It is characterized by good adhesion to the substrate, excellent workability, high strength, non-combustibility, and good vapor permeability. It is resistant to UV rays and atmospheric influences. Due to its characteristics, it is recommended for the restoration of old buildings and for the protection of cultural monuments. Possible to tint in more than 1300 shades.

Structure of Mortar :

Scratchecd-rille (reib) and full (full-kratz)

Preparation and application :

The substrate to which the render is applied must be solid, clean, dry, and coated with BK-Grund Silicat primer. Mix BK-S Plast before application and, if necessary, dilute with a small amount of water (1-2%, 0.25-0.5 l of water). The render is applied with a steel trowel with thickness of the largest grain. Depending on the desired structure, the render is then processed with a plastic trowel, namely: Full structure – structured in a circular pattern immediately after application; Reib structure – after application, scratch by circular motions until the desired structure is achieved. It is necessary to work evenly and without interruption on continuous wall surfaces. It is necessary to equalize the material required for the continuous facade surface by mixing the contents of multiple bins. See product datasheet for more detailed instructions.

Note :

It is necessary to equalize the materials required for a continuous facade surface by mixing the contents of several buckets.

Application temperature :

From +15°C to +30°C, relative humidity max. 70%. Do not work under direct sunlight, rain, or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.

Consumption :

Approximately 2.4-3.3 kg/m², depending on the structure and granulation.

Shelf life and storage :

12 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

25kg