BK-Microfas Acryl

Acrylic dispersion with microfi bers for exterior walls

USE

CHARACTERISTICS

PACKAGE

Acrylic dispersion paint with microfibers for protection and decoration of new and old facade surfaces. It is produced from high-quality raw materials, provides excellent coverage and water repellency, and is resistant to UV radiation and atmospheric influences. This product effectively bypasses and fills thin cracks in the render (max. 0.5 mm), preventing subsequent cracks or visible transitions on the finished surfaces. It can be tinted according to the Bekament color charts with unlimited color choices.

Preparation and application :

The substrate to which the dispersion is applied must be solid, clean, dry, and coated with BK-MicroGrund Universal primer. The preparation of the paint is performed by adding 5-10% of water (0.25-0.5 l of water for packaging of 5 kg; 0.4-0.8 l of water for packaging of 8 kg; 1.25-2.5 l of water for packaging of 25 kg), with good stirring until complete homogenization. BK-MicroFas Acryl is usually applied with a long-hair roller in two coats by cross motions. The second layer is applied after complete drying of the first, which under normal conditions (T=+23-25 ºC, relative humidity=50-60%) requires 4-6 hours. Work should be done evenly and without interruption on continuous surfaces with a “full roller” to avoid grouping of the filler in one place. See product datasheet for more detailed instructions.

Application temperature :

From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind.

Shelf life :

18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Consumption :

Approximately 0.4-0.45 kg/m² depending on absorbency and roughness of the surface.

Note :

Before working with BK-MicroFas Acryl paint, it is essential to thoroughly assess the type of wall surface. If it is a dry surface, apply BK-Grund Universal in two coats before applying BK-MicroFas Acryl. If the wall surface has cracks, it is necessary to first coat it with BK-MicroGrund Universal, and then apply BK-MicroFas Acryl.

5kg; 8kg; 25kg.