Hydro/Ceramic

Outdoor/Indoor use

For vertical and horizontal surfaces

For surface with direct water contact

For positive/negative pressure ≤ 1,5 bar

PRODUCTS > Waterproofing and tile laying products

BK-HidroStop 1

One component waterproofing coating

USE

CHARACTERISTICS

PACKAGE

One-component, waterproofing coating for horizontal and vertical protection of surfaces from moisture. It is used for waterproofing potentially damp rooms such as kitchens, bathrooms, showers, swimming pools, basements, terraces, etc. It is intended for indoor and outdoor use, for positive and negative water pressure ≤1.5 bar. The material is not intended for surface finishing or for systems that are in permanent contact with water.

Preparation and application :

The substrate to which BK-HidroStop 1 is applied must be solid, dust-free, and free of grease, mold, and loosely bonded parts. Before applying waterproofing, it is advisable to apply the BK-Ultra Prime primer, diluted according to the instructions. In the case of old and unevenly absorbent substrates, as well as porous, highly absorbent substrates, it is necessary to coat the substrate with diluted BK-Ultra Prime at least 4 hours before waterproofing. For peeled-off, worn, and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat. Concrete surfaces must be thoroughly washed with hot water to remove impurities and then coated with BK-Beton Kontakt. The preparation of the compound is performed by lightly mixing 20 kg of powder with 6 l of water until complete homogenization. Allow the compound to rest for about 5 minutes, then stir again. Use the prepared compound within 2 hours. The coating is applied by brush in two coats using crossing motions, until the surface is completely covered. The thickness of one coat is approximately 1 mm, and the second coat is applied after the previous coat has cured. The waterproofing coating should be protected from rapid drying. After 12 hours from the application of the last layer, the surface is ready for laying ceramics (for gluing, use flexible adhesives such as SiproFix BK-110 Flex, BK-160 Super Flex, BK-155 Rapid White, BK-170 Elastic, or BK-160 White). See the product datasheet for more detailed instructions.

Consumption :

Approximately 1.2 kg/m²/mm, depending on the quality of the substrate.

Expiration date and storage :

12 months in original packaging in dry room on pallets.

20kg