Mass for manual leveling of internal walls in a total thickness of up to 5 mm.
Preparation and application :
The substrate on which BK-GletEx Finish is applied must be firm, clean and dry, without weakly bonded parts, greasy stains, etc. Before the first application of the mass, it is necessary to apply the substrate. For mineral and pre-painted surfaces use BK-Ultra Prime, for highly absorbent surfaces use BK-Levelator. In the case of surfaces that peel, wear and/or dust, it is necessary to remove all weakly bonded layers and then apply the BK-Penetrat base. The mass is prepared by adding 25 kg of BK-Gletex Finish powder to 9.5-10 l of water (38-40% water) and mixing until a homogeneous mass without lumps is obtained. Leave the mass to stand for about 10 minutes, then mix once more and add water to adjust the consistency if necessary. The mass prepared in this way is ready for installation and must be used within 24 hours. Apply the mass in at least two layers with a steel trowel or spatula. Apply the first layer in a thickness of 1-3 mm, depending on the surface on which the mass is applied. Apply the second layer after the first layer has completely dried. After drying, process each coating layer by hand with 240-320 fineness sandpaper. For detailed instructions, see the technical sheet of the product.
Consumption :
About 1-1.5 kg/m², depending on the roughness of the substrate.
Shelf life and storage :
12 months in original packaging in a dry room on pallets. The production date is stamped on the packaging.
About us
