BK-Banjalit

Facade mineral render - “Oak bark”

USE

CHARACTERISTICS

PACKAGE

Mineral thin-layer lime-cement-based render, intended for all leveled substrates of lime-cement and cement mortars, for outdoor and indoor use. It is characterized by a relief structure similar to an oak bark. It contains calcium hydroxide and white Portland cement.

Preparation and application :

The surface to which render is applied must be solid, clean and dry, with no loose parts, free of oil stains and similar. Before applying the render, the substrate must be coated with BK-Grund Universal. In the case of highly absorbent substrates, coating with BK-Nivelator is recommended, while in the case of weak and scaling substrates the surface must be coated with BK-Penetrat before applying the render. Preparation is performed by adding about 24-26% of water (6-6.5 l of water for 25 kg of product) while stirring vigorously until complete homogenization; leave the mass to rest for 10 min, then stir once more. The render is applied with a steel trowel and the finishing is usually performed by scratching the surface with a piece of Styrofoam. See product datasheet for more detailed instructions.

Application temperature :

From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind.

Consumption :

Approx. 2.7-3.3 kg/m².

Shelf life and storage :

12 months in original packaging in dry room on pallets. The production date is printed on the packaging.

25kg