BK-In Kul Briliant

Mosaic render with glittering details for interior walls

USE

CHARACTERISTICS

PACKAGE

Decorative mosaic render with multi-colored grains and glossy additives, designed for finishing interior wall surfaces, corridors, pillars, and emphasized details. This render can be applied to fine cement mortars, flat concrete surfaces, fiber-cement, and gypsum board. It is not suitable for use on fresh gypsum renders or wet surfaces. The product offers exceptional strength and water repellency, with a granulation (grain size) of 1.0 mm.

Preparation and application :

The substrate to which the render is applied must be solid, clean, dry, and free from loose parts, greasy stains, etc. Before application, the substrate should be coated with BK-Acryl or BK-Grund Universal primer, tinted to match the final plaster shade. The substrate must dry for a minimum of 12 hours before applying the mortar. Stir the BK-In Kul Briliant before application to make it foamy, and if necessary, dilute with a small amount of water (up to 1%, or 0.25 l). Mix the material by transferring it from one container to another, manually or using a low-speed electric stirrer. The render is applied with a steel trowel from the bottom upwards, at a thickness 50% larger than the grain size of 2-2.5 mm. The applied layer should be well aligned to eliminate visible gaps between the marble grains. It is important to work evenly and without interruption on continuous wall surfaces. For more detailed instructions, refer to the product datasheet.

Application temperature :

From +5°C to +30°C. High humidity and low temperatures can significantly extend the render bonding time.

Consumption :

Approximately 3 kg/m².

Shelf life and storage :

18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

25kg